1 / 2
CPAP Standard 22mm Tube to Hair Dryer Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter connects a standard 22 mm CPAP tube to a Conair Testarossa hair dryer
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1296
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (56)Powiązane
This is an adapter to connect a standard 22 mm CPAP tube to a Conair Testarossa hair dryer.
Printing instructions
- Print the .stl file as-oriented.
- There's not a lot of surface contact area; you may have first layer adhesion issues depending on your material and slicer settings.
- I printed several iterations of this in PETG on the satin sheet perfectly with no brim.
Safety warnings
- Follow the cleaning procedure specified by your CPAP manufacturer
- If you are still considering using this adapter, choose an appropriate 3D printing process and materials
- Make sure to use the cold air-only feature of the hair dryer
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., hair dryer diameter, clip size, etc.) for a different hair dryer, send me some measurements and I'll see what I can do.