1 / 2
CPAP AirMini Tube to Hair Dryer Adapter — zdjęcie 1
1 / 2

CPAP AirMini Tube to Hair Dryer Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adapter connects a Resmed AirMini CPAP tube to a Conair Testarossa hair dryer

Ocena
0 / 5
Polubienia
23
Pobrania
79
Wydruki
0
Wyświetlenia
1046
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an adapter to connect a ResMed AirMini CPAP tube to a Conair Testarossa hair dryer.

Update 2024-04-27: there is a new file, CPAP AirMini Interface Only 44-12.stl, that is just the AirMini connector brought down to a 44mm circle base with 12mm cutout for the air passage. You can use this to remix the AirMini adapter.

Printing instructions
  • Print the adapter .stl file as-oriented.
  • There's not a lot of surface contact area; you may have first layer adhesion issues depending on your material and slicer settings.
  • I printed several iterations of this in PETG on the satin sheet perfectly with no brim.
Safety warnings
  • Follow the cleaning procedure specified by your CPAP manufacturer
  • If you are still considering using this adapter, choose an appropriate 3D printing process and materials
  • Make sure to use the cold air-only feature of the hair dryer
Notes
  • I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., hair dryer diameter, clip size, etc.) for a different hair dryer, send me some measurements and I'll see what I can do.

Tagi