Single Color Ship Identification Kits for X-Wing: The Miniatures Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dial Covers, Target Locks, Inserts, and Arc Indicators for keeping track of maneuver dials and ships
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 219
- Wydruki
- 1
- Wyświetlenia
- 1382
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Upgrade your X-Wing squadron with these Dial Cover, Target Locks, and Base ID Inserts. Perfect for streaming!!! Great for play at a local store. Especially for swarms.
Dial Cover
The maneuver dial pivots easily in to and out of the dial covers. However, they will not fall out no matter how hard you shake it. The dial covers use the fully assembled maneuver dial. No dial disassembly required! You really have to feel these things to understand how easy to use they are.
The cutout on the back of the dial covers clearly shows the pilot name and the faction logo. Some faction logos will not appear perfectly in the center of the circle due to variation in FFG's dial backing cutouts.
Inserts
The inserts are designed to fit easily into the plastic bases where the FFG numbered ID Tokens usually go. They allow the large/medium and small pegs to fit through the center.
Arc Indicators
The medium/large rings turn freely on large 1.0 bases and are snug, but not difficult to turn on medium 2.0 bases. The small rings are snug on small ships, but not as tight as the cardboard turret rings that came with most of the ships I own. Those things are a pain to turn sometimes!
Target Locks
Two target locks are included in every kit to support ships that are able to lock multiple targets.
Colors
Black and other dark greys do not work well against the black background of the cardboard bases and most playmats. I find that lighter colors are a lot easier to see.
Printing Notes
I print these at 0.2mm layer height. Anything thinner than that is a waste of time. Make sure you print the inserts and dial cover with the correct side facing down.
DO NOT SELL THIS PRODUCT