1 / 5
Ender 3 Pro V6 Hotend Mount With Stock Fans And BL-Touch Mount — zdjęcie 1
1 / 5

Ender 3 Pro V6 Hotend Mount With Stock Fans And BL-Touch Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact designed v6 mount for the ender 3. Where the stock fans can be used with BL-Touch.

Ocena
3 / 5
Polubienia
57
Pobrania
402
Wydruki
2
Wyświetlenia
2181
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ender 3 Pro V6 Hotend Mount With Stock Fans And BL-Touch Mount

There are many designs for mounting a v6 hotend on an ender 3 pro. still i had a hard time finding a design to make use of the stock ender fans.
I decided to create a design where this is possible in combination with a BL-Touch.
The result is a compact mount that can be mounted on the existing mounting plate of the ender 3 pro.

So test it out for yourself and let me know in the comments what you think of the design!

 

Required material:

8x heat Insert M3x5x4.
2x bolt BHCS M3x25. 
4x bolt SHCS M3x12. 
3x bolt SHCS M3x6.

Recommended print settings:

Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.

Printable without support!

The design is designed with support that is easy to remove after printing.

 

 

 

 

 

 

 

Note that the hotend must be mounted with the heater at the rear!

 

 

 

 

 

 

 

→ Please follow more designs soon !!! ←

Tagi