Ender 3 Pro V6 Hotend Mount With Stock Fans And BL-Touch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact designed v6 mount for the ender 3. Where the stock fans can be used with BL-Touch.
- Rating
- 3 / 5
- Likes
- 57
- Downloads
- 402
- Makes
- 2
- Views
- 2,181
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ender 3 Pro V6 Hotend Mount With Stock Fans And BL-Touch Mount
There are many designs for mounting a v6 hotend on an ender 3 pro. still i had a hard time finding a design to make use of the stock ender fans.
I decided to create a design where this is possible in combination with a BL-Touch.
The result is a compact mount that can be mounted on the existing mounting plate of the ender 3 pro.
So test it out for yourself and let me know in the comments what you think of the design!

Required material:
8x heat Insert M3x5x4.
2x bolt BHCS M3x25.
4x bolt SHCS M3x12.
3x bolt SHCS M3x6.
Recommended print settings:
Material: ABS.
layer height recommended: 0.2mm.
Extrusion width recommended: Forced 0.4mm.
Fill Type: Grid, Gyroid, Honeycomb, Triangle or Cubic.
Infill percentage recommended: 40%.
Wall count recommended: 4.
Solid top/bottom layers recommended: 5.
Printable without support!
The design is designed with support that is easy to remove after printing.

Note that the hotend must be mounted with the heater at the rear!

→ Please follow more designs soon !!! ←