Removable landing gear and wheels for Bixler 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a removable undercarriage for Bixler / Bixler 2. I´ve included some wheels too.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a removable undercarriage for Bixler / Bixler 2. I´ve included some wheels too.
Print instructions
Category: Engineering Summary
This is a removable undercarriage for Bixler / Bixler 2. I´ve included some wheels too.
Instructions
You don´t need any support to print this item. It has been designed to be used with M5 screws.
Needed for front landing gear:
-1 x Main piece (3D printed)
-1 x front stiffener (3D printed, must be glued to main piece)
-2 x Wheels (Big or small, as you like, 3D printed)
-2 x M5 (16 mm at least)
-2 x M5 nuts.
-2 bearings (10x5x4 - External, inner and thickness)
-1 x rubber if you don´t want to glue it to the plane.
Needed for Gear landing rear:
-1 x Main rear piece
-1 x Wheel 3 mm (3D printed)
-1 x M3 screw (16 mm at least)
-1 x M3 nut.
-1 x Rubber if you don´t want to glue it to the plane.
Changes and updates:
-2015-05-16 - First Design.
-2015-05-17 - Added rear landing gear and 3 mm. Wheel for it. Uploaded a stiffener for preventing front gear to fold. Must be glued to main piece.