Geeetech A10 Filament Guide With Ball Bearings 608
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This may look like overkill with the 3 bearings and maybe it is, but it works really well :-) Whether the filament…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This may look like overkill with the 3 bearings and maybe it is, but it works really well :-)
Whether the filament comes from underneath or above the printer, you just need to turn the arm with the pulleys in the right position.
When you need to feed the filament manually just turn the pulley-arm out of the way.
Additional parts needed:
1x Screw M4 x 40 mm
2x Screw M4 x 20 mm
3x Self-locking Nuts M4
6x Washers M4
2x Screw M3 x 20 mm
2x Self-locking Nut M3
4x Washers M3
3x Ball Bearing 608
Print Settings
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
20
Filament: PolyMaker PLA
Category: 3D Printing