Geeetech A10 Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geeetech A10 Fan Duct - Work in Progress! Since the original Geeetech radial part cooling fan has been extremly loud…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 746
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Geeetech A10 Fan Duct - Work in Progress!
Since the original Geeetech radial part cooling fan has been extremly loud and the original duct hasn't been ideal too, I tried to improve the duct. This makes the printer a lot quieter but not exactly silent with the 24V Sunon EB40202S2-999 fan I used. Print quality has been improved slightly too on overhangs with PLA.
I printed the "Top"-Part with PLA. "Buttom"-Part with PETG. The "Tip" needs to be printed with ASA or ABS, because even PETG might soften because of the heat that comes from the hotend. A silicone sock for the hotend is recommended. You can find a printable mold for a silicone sock on my thingiverse.
Top needs to be printed with supports everywhere. Buttom only on build plate.
Additional Parts needed:
2 screws M2x8mm
Print Settings
Printer:
Geeetech A10
Category: 3D Printing