Geeetech A10 Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geeetech A10 Fan Duct - Work in Progress! Since the original Geeetech radial part cooling fan has been extremly loud…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 89
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Geeetech A10 Fan Duct - Work in Progress!
Since the original Geeetech radial part cooling fan has been extremly loud and the original duct hasn't been ideal too, I tried to improve the duct. This makes the printer a lot quieter but not exactly silent with the 24V Sunon EB40202S2-999 fan I used. Print quality has been improved slightly too on overhangs with PLA.
I printed the "Top"-Part with PLA. "Buttom"-Part with PETG. The "Tip" needs to be printed with ASA or ABS, because even PETG might soften because of the heat that comes from the hotend. A silicone sock for the hotend is recommended. You can find a printable mold for a silicone sock on my thingiverse.
Top needs to be printed with supports everywhere. Buttom only on build plate.
Additional Parts needed:
2 screws M2x8mm
Print Settings
Printer:
Geeetech A10
Category: 3D Printing