1 / 3
End Cap for Aluminum Extrusion 40 x 40 mm Geeetech A10
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I moved the LCD-Display and the electronics case to the left, I needed some end caps to cover the aluminum…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 241
- Wydruki
- 1
- Wyświetlenia
- 862
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
Since I moved the LCD-Display and the electronics case to the left, I needed some end caps to cover the aluminum extrusions.
It's a tight fit. The cap needs to be pressed firmly against the Extrusion. This way it won't fall off easily.
Category: 3D Printing