1 / 1
Band wire winding for (1552.81 - 1 681.75Mhz) helix antenna — zdjęcie 1

Band wire winding for (1552.81 - 1 681.75Mhz) helix antenna

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The stem enables to wind LHCP or RHCP coil for 1616mhz helix antenna .

Ocena
0 / 5
Polubienia
5
Pobrania
53
Wydruki
0
Wyświetlenia
529
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

The stem enables to wind antenna coil for 1616mhz. The polarization is circular and stem It contains both - left and right hand path(L,R). You can chose desired polarization base on your needs. If you transmit an signal using satellite dish with the left. cir. polarization, signal will be mirror to right on dish and transfer to orbit.

With 6 winds the Gain of antenna could be ~ 11DBi,
with 5~10.27DBi,
4~ 9.39DBi.

Minimum reflector diameter should be ~ 115mm.

The coil should be tuned best for:
1552.81-1681.75Mhz (@-1dB)

For winding I recommend to use classic electrical 2.5mm copper wire. If you plan to transmit, do not forget to add some compensation copper band on the end. Since coil resistance would be different from 50 ohm.

Tagi