Vice jaws for bicycle maintenance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original design by aiber.
- Ocena
- 5 / 5
- Polubienia
- 133
- Pobrania
- 397
- Wydruki
- 2
- Wyświetlenia
- 2667
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the original design by aiber. I narrowed the pads down so they would consume less plastic to print, made the text markings larger so they'd show up better when printed, and added three holes to each to fix 8x3mm rare earth magnets so they hold themselves in place on the vise jaws.
Print instructions
Category: Tools Summary
Remix of the original design by aiber. I narrowed the pads down so they would consume less plastic to print, made the text markings larger so they'd show up better when printed, and added three holes to each to fix 8x3mm rare earth magnets so they hold themselves in place on the vise jaws.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 100%
Filament: eSun PETG translucent blue
Notes:
Print at 100% or as close as possible, because if you use infill and then clamp something in these jaws, they might crush before they get sufficient purchase. This does mean that they will consume quite a bit of plastic, which is part of why I shrank them down from the original.