Liczymy pasujące modele…
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
UPDATED 2025-05-12: I was cleaning my bicycle's cassette and pushed a little too hard, and near the tip of the tool, two teeth in from the tip, the tool broke and bent up. So, I redesigned these to have a little more material between the…
This is a bike Freewheel (not cassette) remove tool. Be aware that the Freewheel is mounted with high torque and the plastic tool may not hold up.
I originally printed the source model but didn't have a 30mm socket to use with it. I had to resort to using a adjustable crescent wrench. Unfortunately the wrench just slipped as the plastic was elongating out the open end of the wrench.…
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
This is a remix modified to let pass a 17mm nut Category: Tools
Designed to be compatible with the 16-19T freewheels by DNP. Probably also compatible with BLB Superior freewheels, as they seem to be the same product, but re-branded. 30mm hex wrench faces. Suggested to print with 100% infill, as the…
The flywheel now has a thin ring holding it while it prints, which should break free easily. And I didn't have magnets for the bit so I made the fit tighter so friction can do it's thing.
Ratsche Freilauf Freewheel for Filament Spool Winder
I was trying to remove a Kangyue freewheel, and my Park Tool FR-1.3 didn't fit (just barely). So this one has slightly deeper spline cut outs and a tighter overall fit to minimize rounding over the printed tool when used with a 1" /…
I needed a simple spacer for my Shimano freehub with Hyperglide splines. Seemed to proper model to be online so I created this one. Tested on Hunt freehub body and it was a very narrow fit with almost no extra space although it still…
My filament spool is on bearings and it spins too freely. This gives a variable amount of resistance. It uses a 1” paint brush and 1/4-20 cap screw. Cut the wooden handle off of the paint brush just above the metal ferrule. A360 viewer…
I keep my ERCF on the side of my Voron 2.4 and the spools are on the table on rollers underneath it. I usually just load filament to the ERCF, and remove it after print, so there is no benefit to roll it to the buffer. This is an ugly…
This part allows the license plate to be moved to the back of the trunk. It attaches to a standard Harley Davidson laydown license plate mount bracket available from Amazon (see picture). The two LED lights are also available from Amazon.…
A singlespeed DNF removal tool for BMX bikes and MXUS/QSMotor hub motor freewheels.
basically it is an alternative to EAN-GTIN 8590831431217 I needed to remove a GIANT Bicycle crankset / camshaft It uses the same nut as some freewheels with 4-notch pro tip: don't use pla it is to weak trust me i tried
Plastic top cover of button for piaggio Ciao to swich between freewheel and engine. v.1 all dimmensions taken from my ciao px v.2 dimmensions from blueprints form internet
Changed the magnet from the original model to use 2 6x2mm and added a small lip that keeps the freewheel knob at the end in place during print. Needs to be cut with a knife after printing. Print with the bit side down on the print bed. I…
"Free wheel" or “one way” gear. Spins in one way but not in the other. I made it for a 8x16x5(it's less than a dollar on aliexpress, even the high quality ones) bearing to be placed in between the 2 big parts. You need 4 of the small…
Gridfinity 1x1x4 solid bin.
Custom Endcap Adapter freewheel with "142mm Light" axles when converting to Shimano Micro Spline 12s freehub. The Issue: Standard 12x142mm endcaps often have a large flange that interferes with the Micro Spline Lockring, causing either…
to assemb;e, slide the parts of the back axle together and put in back section of the bot. If you want to drive it with a stepper, attatch it to the 2 L's that stick up in the back of the base, then put the bevel gear onto the shaft. from…
Freewheel tool for 8 spline freewheel on bmx/ singelspeed bikes. Needs a harder filament to work. CF PLA is to brittle. Maybe ABS, petg cf or similar will work, gave up on making it work since i only have. Pla and cf pla. tool fits…
to assemb;e, slide the parts of the back axle together and put in back section of the bot. If you want to drive it with a stepper, attatch it to the 2 L's that stick up in the back of the base, then put the bevel gear onto the shaft. from…
UPDATED 2025-05-12: I was cleaning my bicycle's cassette and pushed a little too hard, and near the tip of the tool, two teeth in from the tip, the tool broke and bent up. So, I redesigned these to have a little more material between the…
Printed with: 0.08mm layer height, 0.4mm nozzle, 9 walls, 100% infill, PLA. 🔧 Modifications Made: I made some changes to the original model after my first print didn’t work well — the top section slipped and got deformed under pressure.…
