Nespresso Pod Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack to hold Nespresso Vertuo Coffee Pods
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 284
- Wydruki
- 3
- Wyświetlenia
- 2478
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Redesign of a cabinet door rack for Nespresso Vertuo Pods. I designed it to mount vertically so it would fit within the recess of the cabinet door. I left the design more angular (vs. curves) so it would print cleaner without supports. It will store 7 pods when the top is stacked above the bottom. There is also a slight taper on the mouth of the upper bracket to facilitate loaded the pods. I thought about sizing them for 10 pods, but they would have been too tall to easily load the pods.
I mounted them to the cabinet door with 3M Command Strips.
I did include a spacer part that can be placed between the Bottom and the Top so that a full 10 pods can be loaded. (Note: not pictured!)