1 / 3
Extended leg support for IKEA Poäng chair - Prevents tipping — zdjęcie 1
1 / 3

Extended leg support for IKEA Poäng chair - Prevents tipping

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Helps prevent the chair from tipping over forwards by creating larger legs than the original.

Ocena
5 / 5
Polubienia
11
Pobrania
115
Wydruki
1
Wyświetlenia
1189
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We're having trouble with family members tipping over on our IKEA Poang chairs.  We've tried several things, including gentle reminders not to sit on the very edge of them, but nothing has worked.

The Poang chairs do come with a little leg to prevent them from tipping, but it is tiny and, as far as we can tell, useless.  Here I leverage that original mounting point to make a much larger leg.  The curvature of the extension is meant to conform to the chair exactly, so forces are transmitted from the leg up into the frame of the chair instead of the screw itself.

We have hardwood floors, so there is one version of the model with a slightly-indented bottom where you can affix a long flat felt pad to prevent the leg from hitting the floor directly.  It is sized to fit the width of one of the long flat pads from this set, cut in half.

I used 5 perimeters and 20% gyroid infill in PETG for strength.  They've held up so far, but revisions may be necessary down the road.

 

Fits standard Poang chairs.  Will not fit the kids or rocking chair variants.  A photo of the original leg is provided for comparison purposes.

Tagi