35 modeli
Very simple, it's a rig to attach sim wheels to your Ikea Poäng chairs. Added Logitech and Thrustmaster holes to attach them with bolts. The pitch of the wheel can be adjusted just as the overall height of the rig. A shifter plate can be…
These pads lift the chair by 8mm- enough, so that the Vacuum Robot is not getting stucked.
Study mount to attach a T16000m HOTAS system to a Poang chair. It's a bit long of a print and requires eight M5x40mm bolts, and eight M5 nuts, but it's secure, adjusts back and forth, and easy to assemble. Tolerances should be big enough…
I had tried several other solutions for this, but decided in the end to make my own. These clip on just tight enough that you can pick up and move your chair without fear of the guards moving. There are two sizes, one for the side pieces,…
It's quite possible to use a mouse right on the chair arm without any mods, but with this addon, it becomes even better.
Print with wood filament for a nice woody touch Yes the big one was a little hazy at the top, reduce printing speed near the end
This is a mount I made for my Ikea Poang for DCS, its specifically made for the Logitech X56 or Saitek X55 HOTAS. You'll need two Brackets and 2 Mounts and some hardware listed below. I've found you only need to use half of the mounting…
La poltrona Poang di IKEA è comoda, ma non ha posti dove appoggiare oggetti, tra cui lo smartphone. Per ovviare a questo, ecco il progetto adatto ;-) NOTA: Per usare il minor numero di supporti, si consiglia la stampa in obliquo (come da…
I've used PLA material and draft setting (layer height 0.3 mmm) to print it (weigh: approx 40g). no supports needed use brim, because it's a 10cm tall object and you don't want to knock it over while printing 2 pcs per chair
This is a snap on extension to IKEA Poäng chair - and makes it even more comfortable! It takes a coffee cup and places it directly in reach while sitting in the chair. The smaller version takes normal drinking glasses and fits for the…
Ils en faut 4 pour les cotés et 2 pour l'arrière. Un bout de double face pas trop épais pour les tenir (ils sont très ajustés).
This is a mount I made for my Ikea Poang for DCS, its specifically made for the Logitech X56 or Saitek X55 HOTAS. You'll need two Brackets and 2 Mounts and some hardware listed below. I've found you only need to use half of the mounting…
This is a simple piece that lifts up the headrest to an adjustment point of your choosing on the leather version of the Ikea Poang chair. I have always been a bit too tall and I developed a habit of lifting up the headrest a few inches…
I have a SwitchBot K10+ that keeps wanting to overcome the back side of the chair. Print with 0,32 Layer Height on a 0,4mm nozzle, it doesn't need to be pretty :)
Prints in given orientation without supports. ♥ Post your makes, get Prusameters! ♥
Set of 4 wedges for the IKEA POANG child seat, so that the vaccum robot (in my case a Roborock S7) don't try to climb on it. I used double face tape to attach them.
Designed to mount the Virpil Mongoost CM-2 Throttle to a POANG chair. Will need: M5x16 6x M6 nuts 6x M5x20 4x Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Layer Height Infill: 20%…
I don't have any available space for my surround speakers, so I've designed a holder for the rear speakers that attaches to the Ikea Poäng chair. Because the chair has a curve on the backside, there are two version of the stand, left and…
A remix of an already wonderful mount By ClassicGOD. This time made specifically for mounting on the Ikea Poang chair. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament:…
Modular Table for IKEA Poäng Armchair Enhance your IKEA Poäng armchair with this modular, snap-on table. Designed for versatility and ease of use, this table features a swappable top system and a secure snap-fit mechanism that attaches…
Extended the mousepad area to the maximum my buildplate would allow for, Added two extra struts to support the extra overhang. Added a diagonal taper to the overhang lips to make installing a bit easier. Recommended to use PETG or another…
Printed in TPU with 2 perimeters and 15% infill.
Armrest Extension for Split Keyboards Upgrade your Poaeng chair with this simple, functional armrest extension. Specifically designed for split keyboard users, this "mini-table" allows you to position your keyboard halves at the perfect…
A quick cup holder for your Ikea Poang chair. The right hand version is what is pictures. It fits in one of two heights on the outside of the right armrest or on the inside face of the left armrest (last photo). I printed in PETG 0.28m,…
It's quite possible to use a mouse right on the chair arm without any mods, but with this addon, it becomes even better.
Modular Table for IKEA Poäng Armchair Enhance your IKEA Poäng armchair with this modular, snap-on table. Designed for versatility and ease of use, this table features a swappable top system and a secure snap-fit mechanism that attaches…
Set of 4 wedges for the IKEA POANG child seat, so that the vaccum robot (in my case a Roborock S7) don't try to climb on it. I used double face tape to attach them.
This is a clip-on cup holder for an IKEA Poang. The poang arm-rests are angled at 8 degrees. This cup holder compensates for that angle so that the drink lays flat. I split it into two pieces, so that no supports are needed. Please verify…
A cup holder for an Ikea Poang Chair There are already some cup holders for the Poang Chair on Thingiverse. However, I wanted something that mounted more securely, but also didn't require other hardware (like nuts and bolts) to hold it in…
Public domain IKEA Poang chair model by etanion . Originally uploaded to Blend Swap .
A modification to the Sawyer42 - model. It makes a more wide placement for joysticks. It can be changed, by “shrinking” the middle bar. Here it has 200 mm, 5cm form either side is used to be placed inside on chair arm brackets. With this…
