1 / 3
Barrier for IKEA POANG chair for robot vacuum cleaners
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Does your robot vacuum cleaner "jump" over the horizontal chair legs Ikea Poang? With this barrier, it will bounce back.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (23)Powiązane
- I've used PLA material and draft setting (layer height 0.3 mmm) to print it (weigh: approx 40g).
- no supports needed
- use brim, because it's a 10cm tall object and you don't want to knock it over while printing
- 2 pcs per chair