Scout 32 - Custom Snap in USB Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scout 32 - Custom Snap in USB Holder with built in zip-tie management. Can be used to hold anything else as well.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Scout 32 - Custom Snap in USB Holder with built in zip-tie management. Can be used to hold anything else as well.
This Model I originally found on the website: Scout32 – ESP32 WiFi FPV Camera Rover – Pilot Hobbies
Then found same one here: Scout32 ESP32 WiFi FPV Camera Rover by Ross Peters | Download free STL model | Printables.com
Built the model, but wanted cheap and commonly available way to power it up.
The diameter of the holder is ~34mm. My USB Battery pack was just about 32mm in diameter.
Print Settings in Prusa Slicer
- 0.4mm nozzle
- 0.2mm layer height
- 15% infill
- Printed in Overture PLA
- Basically default settings
INSTALLATION NOTES:
- This is a tight fit.
- Read this again, this model was designed to be a very tight fit and will take a considerable of force to snap it into place.
- Worked perfectly for my need.