Scout 32 - Custom Snap in USB Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scout 32 - Custom Snap in USB Holder with built in zip-tie management. Can be used to hold anything else as well.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Scout 32 - Custom Snap in USB Holder with built in zip-tie management. Can be used to hold anything else as well.
This Model I originally found on the website: Scout32 – ESP32 WiFi FPV Camera Rover – Pilot Hobbies
Then found same one here: Scout32 ESP32 WiFi FPV Camera Rover by Ross Peters | Download free STL model | Printables.com
Built the model, but wanted cheap and commonly available way to power it up.
The diameter of the holder is ~34mm. My USB Battery pack was just about 32mm in diameter.
Print Settings in Prusa Slicer
- 0.4mm nozzle
- 0.2mm layer height
- 15% infill
- Printed in Overture PLA
- Basically default settings
INSTALLATION NOTES:
- This is a tight fit.
- Read this again, this model was designed to be a very tight fit and will take a considerable of force to snap it into place.
- Worked perfectly for my need.