Voron 2.4r2 Chamber Lighting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds downwash lighting to Voron 2.4r2 3D Printer
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 209
- Wydruki
- 3
- Wyświetlenia
- 2949
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Flood lighting is via 24V LED strips mounted on 4 top extrusions angled 45° downward. The LED strip is held in place by a series of 57mm guides that capture the strip. The guides are held in place by two flanges that lock into the top inside 2020 extrusion grove. A 2-wire cable is routed from the 3rd power outlet (Octopus 1.1 PB10), by the right front z belts, up the right inboard vertical extrusion, around the upper Z belt idler to the mating connector at the beginning of the LED strip. A single unbroken LED strip is used.
The lights can be turned ON/OFF and dimmed via the LCD and gcode.
BOM
| QTY | P/N | Description | Link |
| 4 | M3x10 | SHCS | |
| 4 | M3 | T-Nuts | https://www.amazon.com/Hulless-Sliding-Fastener-Aluminum-Accessories/dp/B08NZMD2BJ |
| 1 | 24V FCOB Lights-8mm | https://www.amazon.com/gp/product/B09TKSS3HV | |