Voron 2.4r2 Chamber Lighting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds downwash lighting to Voron 2.4r2 3D Printer
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 209
- Makes
- 3
- Views
- 2,949
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Flood lighting is via 24V LED strips mounted on 4 top extrusions angled 45° downward. The LED strip is held in place by a series of 57mm guides that capture the strip. The guides are held in place by two flanges that lock into the top inside 2020 extrusion grove. A 2-wire cable is routed from the 3rd power outlet (Octopus 1.1 PB10), by the right front z belts, up the right inboard vertical extrusion, around the upper Z belt idler to the mating connector at the beginning of the LED strip. A single unbroken LED strip is used.
The lights can be turned ON/OFF and dimmed via the LCD and gcode.
BOM
| QTY | P/N | Description | Link |
| 4 | M3x10 | SHCS | |
| 4 | M3 | T-Nuts | https://www.amazon.com/Hulless-Sliding-Fastener-Aluminum-Accessories/dp/B08NZMD2BJ |
| 1 | 24V FCOB Lights-8mm | https://www.amazon.com/gp/product/B09TKSS3HV | |