MTB Mudguard Heavy-Duty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed and tested in Australia's off roads Dual suspension or Hard-tails -- Fits 26'' to 29'' Wheels --
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 423
- Wydruki
- 6
- Wyświetlenia
- 3572
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Heavy duty rear mudguard designed to survive the harshest conditions.
Two strong pieces that connect through a heavy duty sliding joint.
No Glue needed!
Print and connect with;
Standard 17 Zip Ties, Sizes; 4.6mm to 5mm width would fit perfect.
5 Zippies connect the two parts together and 12 more connect the Mudguard to the frame.
For the Large size there is extra 3 - 2mm zip ties needed.
Watch this detailed YouTube video I made for it:
https://youtu.be/Qi0zJPAq9tQ
Happy Days :)
I printed this with Prusament PETG, If you can print with something stronger without warping than do that, the stronger (ASA etc...) the better, even though PETG works fine.
Please have a look at the pictures to see how I placed the parts on the build plate, of course every printer is different so bare that in mind.
Min Build plate size; 210/250/210(Prusa mk3s size)
Recommended; 100% infill, Brim 15mm Min for Bottom part.
0.4 or 0.6mm Nozzle, 0.15 or .20 Layer Height, 4-6 Perimeters.
Happy printing!