MTB Mudguard Heavy-Duty
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed and tested in Australia's off roads Dual suspension or Hard-tails -- Fits 26'' to 29'' Wheels --
- Rating
- 5 / 5
- Likes
- 123
- Downloads
- 423
- Makes
- 6
- Views
- 3,572
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Heavy duty rear mudguard designed to survive the harshest conditions.
Two strong pieces that connect through a heavy duty sliding joint.
No Glue needed!
Print and connect with;
Standard 17 Zip Ties, Sizes; 4.6mm to 5mm width would fit perfect.
5 Zippies connect the two parts together and 12 more connect the Mudguard to the frame.
For the Large size there is extra 3 - 2mm zip ties needed.
Watch this detailed YouTube video I made for it:
https://youtu.be/Qi0zJPAq9tQ
Happy Days :)
I printed this with Prusament PETG, If you can print with something stronger without warping than do that, the stronger (ASA etc...) the better, even though PETG works fine.
Please have a look at the pictures to see how I placed the parts on the build plate, of course every printer is different so bare that in mind.
Min Build plate size; 210/250/210(Prusa mk3s size)
Recommended; 100% infill, Brim 15mm Min for Bottom part.
0.4 or 0.6mm Nozzle, 0.15 or .20 Layer Height, 4-6 Perimeters.
Happy printing!