Xiaomi Mi Temperature and Humidity Monitor 2 housing replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom 3D printed housing for Xiaomi Mi Temperature and Humidity Monitor 2. Perfect fit after transplanting components.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The 3D model is a custom housing designed specifically for the Xiaomi Mi Temperature and Humidity Monitor 2. This model was created to provide a solution for those who may have encountered the issue of their original housing melting or breaking. The 3D design was carefully crafted to provide a perfect fit for the device and its components. This model is an excellent solution for those looking to give a second life to devices, while still maintaining its core functionalities.
Parts
For assembly you will need:
printed parts
Torx 5 screws from the original housing
Some clear vinyl
For parts print the following:
1 x Xiaomi Mi Temperature and Humidity Monitor 2_1.stl
1 x Xiaomi Mi Temperature and Humidity Monitor 2_2.stl
Assembly
- Cut 2-3 squares of vinyl to the same size as the LCD screen.
- Stack the squares on top of each other and place them inside the housing.
- Place the LCD screen on top of the vinyl squares.
- Secure the PCB board to the housing using the two original torx 5 screws from the damaged housing.
- Insert a battery into the rear of the housing. (You might need to bend the battery connectors to a slight angle for an easier battery installation.)
- Put all the pieces together to complete the assembly.