1 / 5
Xiaomi Mi Temperature and Humidity Monitor 2 housing replacement — image 1
1 / 5

Xiaomi Mi Temperature and Humidity Monitor 2 housing replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.78 – €0.95 net (excluding VAT)

For file: Xiaomi Mi Temperature and Humidity Monitor 2_2_0.3mm_PETG_MK3S_48m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.86 excluding VAT (range midpoint).

Weight reported by the author
13 g
Print time reported by the author
48 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Custom 3D printed housing for Xiaomi Mi Temperature and Humidity Monitor 2. Perfect fit after transplanting components.

Rating
0 / 5
Likes
5
Downloads
41
Makes
0
Views
571
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The 3D model is a custom housing designed specifically for the Xiaomi Mi Temperature and Humidity Monitor 2. This model was created to provide a solution for those who may have encountered the issue of their original housing melting or breaking. The 3D design was carefully crafted to provide a perfect fit for the device and its components. This model is an excellent solution for those looking to give a second life to devices, while still maintaining its core functionalities.

Parts

For assembly you will need:

printed parts
Torx 5 screws from the original housing
Some clear vinyl

For parts print the following:

1 x Xiaomi Mi Temperature and Humidity Monitor 2_1.stl
1 x Xiaomi Mi Temperature and Humidity Monitor 2_2.stl

 

Assembly

  1. Cut 2-3 squares of vinyl to the same size as the LCD screen.
  2. Stack the squares on top of each other and place them inside the housing.
  3. Place the LCD screen on top of the vinyl squares.
  4. Secure the PCB board to the housing using the two original torx 5 screws from the damaged housing.
  5. Insert a battery into the rear of the housing. (You might need to bend the battery connectors to a slight angle for an easier battery installation.)
  6. Put all the pieces together to complete the assembly.

Tags