Vesa laptop mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laptop hooks and end caps for 20x20 aluminum profile.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 2251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
My own try of custom VESA laptop holder/mount. Printed with PETG they may be a bit hard to slide in at first, but they hold on really good.
I've mounted my Dell Latitude 5580 with these hooks and they hold it in place for around 6 months now with no sign of degradation.
Mounted with M5 bolts to pre-drilled(on my own) profiles.
The drill with thread is easily accessible from a hardware store, it's just the tapping that takes some patience to prepare. Should you need any tips, PM me.
Print setup( 3mf file attached for convenience):
0.4mm nozzle
0.3mm layer height(0.2 for first layer)
at least 30% infill
NOTE:
the profiles are connected to each other with both of angle connectors and M5 bolts for my own peace of mind.