Ender 3 V2 Y-Axis Stepper Cooling Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this to keep the Y-Axis stepper motor cool. This mod (pictured with 20x20x10 silent fan running off of 12VDC very…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 1297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this to keep the Y-Axis stepper motor cool.
This mod (pictured with 20x20x10 silent fan running off of 12VDC
very quiet fan works very well.
I used 3M heavy duty double side tape to secure the fan duct/shroud to the y-axis sensor housing (next to the stepper itself)
only needs tape fan and screws to secure the fan to the duct.
There are internal wind vanes to ensure proper position and movement of air over and around the stepper.
Please feel free to post a make :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Filament: Canadian Maker Series PLA Low Sheen Black
Category: 3D Printer Parts