Laptop stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laptop stand with base of various heights. Can be printed on Prusa Mini+
- Ocena
- 4,5 / 5
- Polubienia
- 35
- Pobrania
- 337
- Wydruki
- 5
- Wyświetlenia
- 2205
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Laptop stand with base of various heights. Can be printed on Prusa Mini+ -- you'll have to rotate the items 45 degrees and print each item separately.
For the full stand, including the bottom (which raises the stand), you need
- 2 x laptop_stand_side.stl (one of which needs to be printed mirrored)
- 2 x laptop_stand_bottom_*mm.stl (the pictures show the 40mm high bottom, i.e. laptop_stand_bottom_40mm.stl)
- 4 x laptop_stand_cross_bar
The model also has indentations for the bumpers, which help prevent the laptop and stand from sliding. I used 12.7mm x 3mm square bumpers (Amazon).
I tested the stand with a 16" Macbook Pro (2019).
Model was created with OpenSCAD and source is available in the .zip file. Running make will generate all the STLs.