1 / 7
Laptop stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Laptop stand with base of various heights. Can be printed on Prusa Mini+
- Rating
- 4.5 / 5
- Likes
- 35
- Downloads
- 337
- Makes
- 5
- Views
- 2,205
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Laptop stand with base of various heights. Can be printed on Prusa Mini+ -- you'll have to rotate the items 45 degrees and print each item separately.
For the full stand, including the bottom (which raises the stand), you need
- 2 x laptop_stand_side.stl (one of which needs to be printed mirrored)
- 2 x laptop_stand_bottom_*mm.stl (the pictures show the 40mm high bottom, i.e. laptop_stand_bottom_40mm.stl)
- 4 x laptop_stand_cross_bar
The model also has indentations for the bumpers, which help prevent the laptop and stand from sliding. I used 12.7mm x 3mm square bumpers (Amazon).
I tested the stand with a 16" Macbook Pro (2019).
Model was created with OpenSCAD and source is available in the .zip file. Running make will generate all the STLs.