1 / 6
TINA2/Bresser/Weedo extended holder of filament spool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extended holder for 1kg spool
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 266
- Wydruki
- 0
- Wyświetlenia
- 1278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Because my second little printer Bresser raptor 3D ( or TINA2 ) has only holder for 0.5 kg filament so I decided to make a better coil holder which is 1kg and of course bigger.
I recommend printing from PETG material to a line thickness of 0.2mm and with support organic or tree.
Platform is not needed.
Infill is depend on you, i choose lightning and it ok with 1 kg spool on it.
print take it around 30min on Ender3/Pro
and it fit into original holder clip
