516 modeli
Start G-code lengthens the purge line to better remove any filament pieces that may be stuck to the nozzle and places it outside the print area (100x110x100). End G-code presents the completed print more forward at the end of the print to…
Llavero del Campeón del Mundo, nuestro querido Lio Messi con la 10
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm. A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a…
I'm using this shorty remix of Angryhulk's spool holder with 608 skateboard bearings on my Ender3 and wanted to fit it to my small army of Tina2's. For the record: Tina2's go by many different brands and names. Bresser Raptor, Monoprice…
Scarfring or neckerchief based in a "Fire" guide badge (for WAGGGS leaders)
A replacement foot pedal for the Tramontina 13 gallon step trash can available from Sam's Club. Two versions of this print are available: Standard version (does not fit the MK3S+ print volume) Chamfered version (fits MK3S+, matches OEM…
A simple 11.8 mm height case for Destination Ticket Cards for Ticket To Ride USA and Canada. I accidentally shuffled Destination Ticket Cards with Train Car Tickets many times. To avoid the problem, I designed simple case to stack on top…
kvetinac stafordsirsky bulterier
I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to the complete Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687…
I had an empty bay in my Keyport Slide and discovered my Titan Nano pick set should be able to fit inside perfectly! This is the pick set I designed this for: https://lockpicktools.com/bogota-titan-nano-lock-pick-tool-set/ Printed in…
Klíčenka ve tvaru květiny vytvořené z kruhů. Flower-shaped keychain made of circles.
Medailon ve tvaru květiny vytvořené z kruhů. Flower-shaped medallion made of circles.
Ticket To Ride Destination Cards Holder Made for TTR New York smaller destination cards but it also works for normal sized cards. Modeled to print without supports but your milage may vary. It sized to take not much space in front of you…
Llavero con forma de sandia que se relaciona con la bandera de Palestina y que lleva un nombre para personalizarlo. Esta formado de tres piezas, el arco más grande se debe imprimir en verde y lleva la anilla para colgar el llavero. El…
Rediseño de busto de messi con remera de argentina 2023, ideal imprimirlo con pico 0.2-0.3 con altura de capa 0.1 para que salga con el nivel de detalle de las fotos que he subido yo.
This remix reduce the height of the shirt to half, so the keychain prints faster and uses less material. Here you are another remix by Guillermo Gomez, without some details. --- Este remix reduce la altura de la camiseta a la mitad, así…
Prestar mucha atención a la calibración de la maquina y de ser necesario ajustar compensación horizontal (x y) Actualización!, agregue el archivo 3mf para imprimir directamente multicolor.
1kg spool holder 1Kg spool holder large version https://www.buymeacoffee.com/teto121119u
Re-mix of Tina2 spool holder by https://www.thingiverse.com/doctor_voctor, to move it back to the rear of the printer so larger spools don't block the extruder. I printed the original, but the filament always got blocked from loading into…
ALOUTTINAE 13 Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Infill 20% gyroid First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None Brim Shouldn't…
Here are the files for my Cantina Cups, They are sized to fit a Soda Can and prints with zero supports. I hope you enjoy and have a great summer. Thanks Bugman If you like what I am doing please consider buying me a coffee or tipping. 😁👍…
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
Mate de la seleccion argentina. con el escudo con 3 estrellas. se imprime por partes. Para el polimero noster. Es escudo una vez impreso se dobla con calor y se pega.
modelo de escarapela argentina Inicia con colore celeste luego continua con color blanco y amarillo acepto donaciones link.mercadopago.com.ar/printable
Star Wars inspired cantina playset for 3.75" action figures, made by me. Featuring a bar, grill, benches and tables. Every piece can be printed with an FDM printer. Glueing the pieces together is required! I printed mine in PLA on my…
The included profile with the Entina 3D Tina2s works fine, for basic models. But it has some stringing and is made to conserve filament. which means it isn't really the best quality. I've gone through all the setting and changed most of…
I recently purchased two used Tina 2 3D printers from ebay, and learned their motors protrude bellow the bottoms of them, and the driveshafts grind on the table! I quickly made this 3D model and printed it on my Tina 2 whilst it was…
Big gun. Good luck with holding it. Might be easier with the backpack designed to hold it 👇 https://www.printables.com/model/803600-atelidae-weapons-backpack-railgun
Rotunda sv. Martina je nejstarší dochovanou rotundou v Praze. Je skoro tisíc let stará, přežila husity, Prušáky, požár, i asanaci při stavbě vyšehradské pevnosti. Využívala se během staletí jako skladiště střelného prachu, dílna,…
V2.5 of the full sized spool holder for the TINA 2 & 2S. Prints in two parts on the TINA 2 & 2S. It's longer and has a slight angle to get the filament path a tad straighter. The treads work, but you have to apply a decent amount of…
Messi Remera Argentina Llavero Remix
Diseño 100% propio. @mapa de argentina encastrable
THE CUP is cumming HOME
El modelo está constituido por: Escudo Impreso a Colores (Imprimir en el orden correspondiente según el nombre de los archivos), impreso por capas con distintos colores; se añade un modelo completo si deseas imprimirlo por cambio de color…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
I got a Tina 2 Basic for review, and it needed a full size spool holder badly, V2.5 is live and the better option. Link below. There are some out there, but I found they all had some issues. So I made this to tackle a few of those issues.…
Printed with 0.25 nozzle, but you can scale it up and print it with 0.4 nozzle
Something a little more small-arms.
Step 1: Print the blue stripes separately. Step 2: Start printing the remaining part Step 3: Just before changing the filament to black for lettering and number, insert the blue stripes printed in Step 1. Step 4: Continue the print in…
Tina2 Filament Guide If, like me, you have a Tina2, but you're using a 1kg filament spool, then you have an external spool holder, or an extension of the original one. In this situation I noticed that the extruder sometimes struggles to…
Drink coaster. Argentina Sol de Mayo emblem. Print with brown, gold/yellow, and white colored filament. 0.2mm layer height. PLA filament. 15% infill. Used brown for first 1.4 mm, then gold/yellow for 1.4 mm, then white for 1.4, and then…
Remix lapací pasti na sršeň asijskou přizpůsobené na klasickou českou sklenici na med. Průchod pro sršeň cca 8,5mm, únikové otvory cca 5x10mm. → Monitorovací past najdete zde Tisk PETG nebo PLA, bez podpěr. Zhruba 20g filamentu. K…
Thanks to https://www.printables.com/@klandrus_681285 for the original design
🇦🇷 ¡Bienvenidos a Argentina! Welcome to Argentina! This model was designed by Dany Sánchez . The Buenos Aires Metropolitan Cathedral is the main Catholic church in Buenos Aires, Argentina. It is located in the city center. It is the…
🇦🇷 ¡Bienvenidos a Buenos Aires! Welcome to Buenos Aires This model was created by Monumentar3D La Virgen del Carmen , known in English as Our Lady of Mt Carmel , was the patron saint of the Army of the Andes, who fought for the…
MODELO DE PLACA PATENTE ARGENTINA BOQUILLA 0,4 ALTURA DE CAPA 0,16 3 COLORES CON PAUSTE AT HEIGTH EN CADA COLOR IMPRESORA ENDER 3 V2 FIRMWARE MRCISCOCC 2.1.0.1
Inserted it makes a 10mm gap between the lower part of the machine and the original lid of the tray. Combined, it raises the cup 17 mm above the lower surface, allowing a standard IKEA cup to fit perfectly.
Dieses Teil verhindert, dass die Spindel der Z-Achse wobbelt
Soporte para sujertar la varilla de cortina de 15mm de diámetro
🇦🇷 ¡Bienvenidos a Argentina! Welcome to Argentina! This model was designed by Dany Sánchez . The Obelisco (Obelisk) is a national historic monument and icon of Buenos Aires , capital of Argentina. Located in the Plaza de la República in…
Enclosure for the Tina2(S)/ MP Cadet. The door with the window is designed for a 1mm glass/plexiglass. The print is made to be paused and the glass inserted. You can use the template as a guide to cut the glass/plexiglass. PLA doesn't…
Mapa de Argentina con la division de sus provincias. Impreso, tiene una medida aproximada de 420mm x 297mm. Map of Argentina with the division of its provinces. Printed, it measures approximately 420mm x 297mm.
Copa del mundo de Argentina con sus tres estrellas.
Because my second little printer Bresser raptor 3D ( or TINA2 ) has only holder for 0.5 kg filament so I decided to make a better coil holder which is 1kg and of course bigger. I recommend printing from PETG material to a line thickness…
This design is an upgrade for the spool holder in the TINA2. The holder will have some problems with the bigger spools since the height of the printer is small to start. Instead of giving it more height for clearance I chose to use the…
3 modelos del obelisco de argentina, un modelo enteros y los otros 2 son el mismo modelo pero cortado en la mitad para que entrara en una impresora estándar
This Tina2 full size spool holder uses the original nut and bolt. works great with no interference with the extruder lever.
The Procrastinator 3000 is the simplest of mouse jiggler devices. Watch how it works: https://i.imgur.com/9lpT7iE.mp4 Features: Low cost and low energy consumption Usage is undetectable by any software Failproof design Very easy to print…
I found a model similar to this, but the fitment was poor, it could wiggle into direct contact with the heat-block because the clips were very misized for the geometry present.. So I remade my own from scratch, with as reasonably precise…
Just enough space to hold a couple of things for the Tina2 / MP Cadet. The left side and the right side are different lengths from the slot on the top of the. SO unfortunately they are not interchangeable.
Parts required: iPad 3 or 4 gen retina lcd panel control board for this lcd panel with two usb-c ports and mini-hdmi (avaliable on AliExpress) screwed inserts x4 screws x4 Assembling: All electronic parts are fixed with hot glue. Screwed…
A beautiful minimalist painting of a easter bunny and flowers on the wall, with a stand on the table or window decoration Size 146 x 200 mm You can find the small print stand for the table on my profile ↓…
The Weedo Tina2 have a 100x105 bed and this remix of the original Mini Spool holder use the full volume to provide the maximum distance between the bearings (no change vs. original).
Soporte para tubo de cortina. Diseño de gancho y soporte en "U" Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.32-0.48 mm Infill: 15-20 % Filament: Jamg He PETG Grey Category: Household Supplies
I finally got around to creating an insert for Great Western Trail Argentina after quickly realizing that the plastic insert that comes with the game is complete garbage. This makes storage much easier and cleaner. You need one of each…
Mapa de Argentina con fines didácticos
You can find the entire Cantina Booth Diorama on my website . A long time ago, in a galaxy far, far away… I discovered that my Star Wars Black Series Cantina diorama was missing the true essence of the classic film. To restore some of…
The official medal of the 2026 Winter Olympic Games in Milano Cortina embodies the spirit of unity, determination, and resilience. Its unique design combines two distinct halves — one smooth and polished, the other textured and granular —…
Escarapela diseñada originalmente para las fiestas patrias argentinas. También incluí archivos STL preparados para imprimirse en tres colores, como por ejemplo tiene la escarapela italiana. Además, subí los archivos originales en formato…
Drawer to go under the printer. The 80mm drawer is pictured. It turned out much bigger than I thought so I created the 50mm drawer as well. I also included a cover for the Y-axis belt. Although unlikely, I would hate for someone to put…
Hey! Take a look at this Scout woggle I designed, inspired by the Argentinean scout logo. In case you're not in the loop, this logo represents the fleur-de-lis from the Argentina Scout Association. You can find more info at:…
Inspired by the streets of Disneyland's Adventureland, the Tropical Cantina served drinks to weary travelers in the center of Adventureland opposite the Jungle Cruise's boathouse. Though they closed in 1962 to make way for Sunkist I…
I love my Tiny Tina. However, I was going crazy every time I had to exchange the destroyed propguards. Beside that there were some more things that annoyed me, so here is my take on a more improved, more robust version. Base: I added a…
Print Settings Printer brand: Zortrax Printer: M300Plus Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100% Filament brand: Zortrax Filament color: White Filament material: ABS-2
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Mit diesem Filamenthalter könnt ihr 1kg Filamentrollen an eurem Tina2s benuten. Einfach den originalen Filamenthalter abschrauben (2 M3 Schrauben) und diesen hier wieder anschrauben. Gedruckt mit dem Tina2s selbst. With this…
Retro Cantina Playset for 3.75" action figures. Everything prints without supports, glueing not required. Paper Backdrop: Two version are available: one with a slot for a backdrop and one without the slot. I printed my backdrop on office…
¡Disfrutá de tu mate en el auto con estilo y pasión por la Selección Argentina! porta mate para coche con logotipo de la scaloneta gra 🔹 Características del modelo: Diseño ergonómico y funcional ✔ Logo de la Selección Argentina. ✔Archivo…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Optimalizovaná past na sršeň asijskou dle aktuálních poznatků - jaro 2024. Má jen 4 díly, nemusí se složitě sestavovat a váží cca 70g. Prusa MK4 ji vytiskne celou pod 4 hodiny. Past jde zavěsit nebo postavit a připevnit na položku.…
Designed to hold the destination cards in the Ticket to Ride game, so that you can see all destination cards in front of you at once. I always forget which destination cards I own when they're all face down, so I designed these. To print:…
Das Original teil der Phillips Baristina war mir zu hoch und zu klein. Beim verschieben des oberen teils hat es immer unten auf die freie Fläche getropft deswegen habe ich es länger gezogen damit es auch dort hin tropft wenn das obere…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of klchidester7's original model, I faced some issues with the original files assembly due to how thing/small some parts were as well as fragility. 3 pieces are edited from klchidester7's files, the back piece is perfect so I…
Suporte para varao de cortina. 0.28 altura 0.6 largura linha 5 walls ABS
The Baristina coffee holder is very small. With the extension you can put an full bag of 500g of coffee bean. It's designed to be insert on top of the original one, no adhesive needed, it's tight fit.
pozor pro vodotesnost modelu potřebujete vložit více perimetru a nastavení (0.15mm – Quality, 15% Gyroid infill) material= počet perimetru ABS = 2 ASA = 2 CPE = 2 PC = 2 PP = 2 TPEE = 3 PETG = 4 PLA = 4 PA = 4 HIPS = 5 PVB = 5 zdroje:…
Please, tag me on Instagram: @leadeden Happy printing! Scale 100% PLA 0.6 nozzle
I use Tina 2 3D printers in my workshop to print brackets, and so I made an enclosure to keep the plastic fumes in and the shop dust out! The back acrylic window should be cut to 109mm by 109mm The front window should be cut to 132mm by…
Porta creatina-citrullina-proteina. doppio tatto, una grande colomba inerire la creatina, uno piccolo, adatto da imbuto per le bottiglie.
These are Kristina's unique bird and flower-themed side panels for the modular lantern. I created various prints from her design: There are simple solid three-colour prints and variants where the leaves or the flowers create cut-outs.…
Llavero Impreso en PLA, diseñado para hacer cambio de color manual. El modelo es una clásica calcomanía que representa a la emblemática ruta 40 teniendo paso por San Martín de los Andes, Patagonia Argentina. Tiene un agujero de 2mm para…
Pretty good air flow but i didnt test in a simulation ! Its kinda hard to clip the duct in the X-bracket but once in it its very solid. Print it at 0.2mm layer height and in about 5 to 10 minutes you will get it ! No support required Good…
Tina2 Spool Holder Extension
Prints in all scenes you like from rough to Fine NO Support NEEDED optimized for 0,15 layer PRINT in Prusament GOLD paint just the dagger the Shield rim and the helmet SILVER Metallic and the Beart /Base with a Brown HAVE FUN PLEASE SEE…
La idea de la imagen es rememorar algo emotivo y muy usado en Argentina. Quiero dejar en claro que no soy militante ni adepto a ningún partido o alianza política, pero es algo que me pidieron y lo hice con la intención de luego poder…
Have fun printing use Cura 75deg max for support-less printing paint just golden details PLEASE Look at the other miiatures i made
Without a clip over time the bowden tube slipping in and out of the fitting coupler. It ruins 3D printing. In the worst case the tube pops out of the fitting and must be replaced. This applies to both the extruder and the hot end. The…
![[TTR] Ticket To Ride Destination Cards holder](https://media.printables.com/media/prints/112860/images/1109693_a09e85dd-b678-486f-ba35-e787893034c8/pxl_20220105_001515792.jpg)
