Wood Lathe Chuck Wall Mount - Slip On/Off
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wood lathe chuck wall mount. No thread, just slip the chuck on and off.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 320
- Wydruki
- 4
- Wyświetlenia
- 1906
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This wall mount holds your wood lathe chuck at angle, so there's no need for a threaded stud. Just slip the chuck on and off.
There are 4 mounting holes for #8 wood screws.
You will need to open the chuck to clear the stud.
The wall mount holds my NOVA G3 chucks (1"-8 TPI) both with and without a thread adapter. For reference my chucks have a body length of 1.8" [45.7mm] (2.2" [55.9mm] with thread adapter).
I have included a pdf drawing file with some key nominal dimensions so you can determine if this design will work with your chuck.
Print settings:
PETG
.20mm Speed
4 Perimeters
10% Cubic Infill
EDIT: 07/04/2024
I uploaded a model with an extended shaft. The extended shaft is 2.7" [68.58mm] long, up from 1.9" [48.26mm] in the orignal model.
The model is mine, but the idea is not new. Darryl Jones, Dread Knot Woodshop, has a video on how to make one these from wood: