Wood Lathe Chuck Wall Mount - Slip On/Off
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wood lathe chuck wall mount. No thread, just slip the chuck on and off.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 319
- Makes
- 4
- Views
- 1,900
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This wall mount holds your wood lathe chuck at angle, so there's no need for a threaded stud. Just slip the chuck on and off.
There are 4 mounting holes for #8 wood screws.
You will need to open the chuck to clear the stud.
The wall mount holds my NOVA G3 chucks (1"-8 TPI) both with and without a thread adapter. For reference my chucks have a body length of 1.8" [45.7mm] (2.2" [55.9mm] with thread adapter).
I have included a pdf drawing file with some key nominal dimensions so you can determine if this design will work with your chuck.
Print settings:
PETG
.20mm Speed
4 Perimeters
10% Cubic Infill
EDIT: 07/04/2024
I uploaded a model with an extended shaft. The extended shaft is 2.7" [68.58mm] long, up from 1.9" [48.26mm] in the orignal model.
The model is mine, but the idea is not new. Darryl Jones, Dread Knot Woodshop, has a video on how to make one these from wood: