1 / 4
Hex Drill bit Case (1;61mm, 2;70mm, 2.5;76mm, 3;76mm, 4;93mm, 5;103mm, 6;114mm, 8;116mm) — zdjęcie 1
1 / 4

Hex Drill bit Case (1;61mm, 2;70mm, 2.5;76mm, 3;76mm, 4;93mm, 5;103mm, 6;114mm, 8;116mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Check the length of your bit first*This model from the photo is different from the stl I uploaded, so dont get confused!

Ocena
0 / 5
Polubienia
7
Pobrania
29
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

*********The one in the photo is made specifically for myself, which include some weird size bit such as 1.5 & 5.2. The stl uploaded is suitable for more common size drill bits.***********

Hardware needed:

1: M3*12

2: Nyloc Nuts or double nuts(you tighten the two nuts into together) “Other methods of holding the shaft are fine too”

Its really hard to find a drill bit storage that suits you, as people have different drill bits and different no. of bits. And I also want a cover/lid that is hinged to the body, not seperated as many models on this site. Thus, I made one for my own. 

Its going to be rare you have the same kind of bits that this model can fit, so if you really like this model, I have uploaded also the solidwork file here. You can go and “try” to modify it, I said try because I am a terrible CAD designer, so its incredibly messy there. However if you know how to use solidwork, it should be ok.

Print note:

I have tested it only with PETG 0.6n. I think you can use other material on the CASE, however for the LID, as there is a springy lock mechanism, I wont recommend using PLA for it.

Tagi