1 / 4
Hex Drill bit Case (1;61mm, 2;70mm, 2.5;76mm, 3;76mm, 4;93mm, 5;103mm, 6;114mm, 8;116mm) — image 1
1 / 4

Hex Drill bit Case (1;61mm, 2;70mm, 2.5;76mm, 3;76mm, 4;93mm, 5;103mm, 6;114mm, 8;116mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Check the length of your bit first*This model from the photo is different from the stl I uploaded, so dont get confused!

Rating
0 / 5
Likes
7
Downloads
29
Makes
0
Views
420
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

*********The one in the photo is made specifically for myself, which include some weird size bit such as 1.5 & 5.2. The stl uploaded is suitable for more common size drill bits.***********

Hardware needed:

1: M3*12

2: Nyloc Nuts or double nuts(you tighten the two nuts into together) “Other methods of holding the shaft are fine too”

Its really hard to find a drill bit storage that suits you, as people have different drill bits and different no. of bits. And I also want a cover/lid that is hinged to the body, not seperated as many models on this site. Thus, I made one for my own. 

Its going to be rare you have the same kind of bits that this model can fit, so if you really like this model, I have uploaded also the solidwork file here. You can go and “try” to modify it, I said try because I am a terrible CAD designer, so its incredibly messy there. However if you know how to use solidwork, it should be ok.

Print note:

I have tested it only with PETG 0.6n. I think you can use other material on the CASE, however for the LID, as there is a springy lock mechanism, I wont recommend using PLA for it.

Tags