Snap Ball Socket Joint Link - Gooseneck Articulated Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small socket ball links that snap together to make an articulated arm
- Ocena
- 4,667 / 5
- Polubienia
- 117
- Pobrania
- 812
- Wydruki
- 3
- Wyświetlenia
- 3492
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is a small (about 16 mm tall) ball and socket joint link that snaps together to create a long flexible arm. A small amount of force is needed to snap the pieces together. There is a 4mm hole in the tip of the end of the ball to allow for stringing through wires, lights, etc.
I printed in PETG and the pieces are plenty sturdy enough, I have not tried PLA but should work the same with possibly less strength.
Print with ball side down, socket side up. I suggest adding a tiny support brace on the side of the model near the bed when printing to make sure the piece does not become detached from the bed mid-print, but this may not be necessary with good adhesion.