Peony lampshade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lampshade to be entered in the "Lights and 3D printing"-contest on the PrusaPrinters-page.
- Ocena
- 0 / 5
- Polubienia
- 66
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
Lampshade to be entered in the "Lights and 3D printing"-contest on the PrusaPrinters-page.
This lampshade was designed based upon a "Peony-rose".
All you need is an IKEA "Hemma" or compatible light-fixture. The lamp can be mounted hanging or standing.
Installation-manual can be downloaded
in English at http://van-opstal.be/peony-lampshade-installation-manual-en
in Dutch at http://van-opstal.be/pioenroos-lampenkap-installatie-instructies-nl
Instruction video at https://youtu.be/MhdVu1LmLJU
Print instructions
All parts can be printed without support.
Print with flat side down.
It is recommended to print (at least the middle part) in a heat-resistant material.
Overhang is limited as much as possible (no more than 65°).
Measure the socket as there seems to be some difference between the standards ...
There is a version for 36 mm sockets and one for 40 mm sockets. (only the first set is different)