Peony lampshade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lampshade to be entered in the "Lights and 3D printing"-contest on the PrusaPrinters-page.
- Rating
- 0 / 5
- Likes
- 66
- Downloads
- 127
- Makes
- 0
- Views
- 1,248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Lampshade to be entered in the "Lights and 3D printing"-contest on the PrusaPrinters-page.
This lampshade was designed based upon a "Peony-rose".
All you need is an IKEA "Hemma" or compatible light-fixture. The lamp can be mounted hanging or standing.
Installation-manual can be downloaded
in English at http://van-opstal.be/peony-lampshade-installation-manual-en
in Dutch at http://van-opstal.be/pioenroos-lampenkap-installatie-instructies-nl
Instruction video at https://youtu.be/MhdVu1LmLJU
Print instructions
All parts can be printed without support.
Print with flat side down.
It is recommended to print (at least the middle part) in a heat-resistant material.
Overhang is limited as much as possible (no more than 65°).
Measure the socket as there seems to be some difference between the standards ...
There is a version for 36 mm sockets and one for 40 mm sockets. (only the first set is different)