Mantis XOL 2 - for TAP & Bambu Lab hotend with 30mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend & VORON TAP
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 2467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend in combination with VORON TAP.
I also modded the faceplate to have one with led mount and created an adxl 345 mount for it. The complete carriage fits the new VORON TAP without any changes.
You can use a 30mm fan for cooling the Bambu Lab. The original heater and thermistor of Bambu Lab can be used for this MOD. Unfortunately I do not know the designation of the connectors of the thermistor, so I have extended and soldered these cables. However, a use plug and play should also be possible.
The step files are included in my GitHub
https://github.com/PrintStructor/Mantis-Xol