Samsung S22 Ultra Lie-flat half-cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the Samsung S22 Ultra to simply make it lie flat for better pen usage & small protection
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is obviously not a strong protection for the phone. It's meant to make it lie flat on the table to better be able to write with a pen on the screen. I hope it gives still some small protection but that's rather a side effect.
How it's made?
Derivative of @ckth's model. I imported it into Fusion360 and cut off the bottom part, then rounded the new lewly exposed corners to make sure it does not snag or have pointy bits.
Printing
I recommend PETG or even harder materials. No supports needed. Suggested to print with at least 0.15mm or less layer height or less.
Post-production:
Should clamp well on the phone and keeps in place by fitting snugly around the lenses. If it does not clamp on at first use. make sure there are no zits etc on the inside and maybe go very lightly with a de-burring tool around the inside of the lenses.
Careful when snapping it on, depending on your PETG quality, it might break on the side.