1 / 5
Prusa i3 MK3s/+ black PSU holder for IKEA Lack enclosure tower — zdjęcie 1
1 / 5

Prusa i3 MK3s/+ black PSU holder for IKEA Lack enclosure tower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This part was designed for a Prusa i3 MK3S/+ (black PSU) with an accompanying IKEA Lack enclosure tower.

Ocena
0 / 5
Polubienia
12
Pobrania
90
Wydruki
2
Wyświetlenia
943
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This PSU-holder was designed to mount the PSU at the side of the enclosure. 

I have build a tower with 3 IKEA Lack tables, the first one empty, the second one with the first printer and the third one with the second printer.

For my first printer, I just used the mount given in the tutorial (underneath the table). Obviously I could not mount the PSU the same way for the second printer, so I designed this model to easily place it on the side with the cables passed through the given of the enclosure hinge.

The holder is fixed by 2 screws (holes in the model = 6mm). When placing the PSU there is one more screw in the hinge of the PSU (see picture). Don't tighten this screw completely, it's designed to remove the PSU if necessary without removing any screw by slide the PSU  out of the PSU holder.

Tagi