1 / 5
Prusa i3 MK3s/+ black PSU holder for IKEA Lack enclosure tower — image 1
1 / 5

Prusa i3 MK3s/+ black PSU holder for IKEA Lack enclosure tower

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This part was designed for a Prusa i3 MK3S/+ (black PSU) with an accompanying IKEA Lack enclosure tower.

Rating
0 / 5
Likes
12
Downloads
90
Makes
2
Views
947
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This PSU-holder was designed to mount the PSU at the side of the enclosure. 

I have build a tower with 3 IKEA Lack tables, the first one empty, the second one with the first printer and the third one with the second printer.

For my first printer, I just used the mount given in the tutorial (underneath the table). Obviously I could not mount the PSU the same way for the second printer, so I designed this model to easily place it on the side with the cables passed through the given of the enclosure hinge.

The holder is fixed by 2 screws (holes in the model = 6mm). When placing the PSU there is one more screw in the hinge of the PSU (see picture). Don't tighten this screw completely, it's designed to remove the PSU if necessary without removing any screw by slide the PSU  out of the PSU holder.

Tags