Squooshi Washing and Drying Support Frame with Stand

This support frame will help you wash and dry your Squooshi reusable food pouch. We absolutely love these, but find that they need a bit of help to get clean in the dishwasher, and to dry fully before getting put away. I hope you find this useful, too!

Design features

• Minimalist approach to avoid interference with cleaning and drying
• Tine channel to easily load into a dishwasher
• Optional stand to add a little height while drying for better air circulation on a flat surface (i.e., not a drying rack)

Printing instructions

• Print the main piece and the crossbar as-oriented in the .stl file (flat on the print bed).
• Optionally print the stand, also as-oriented in the .stl file.
• See the food safety notes, below.

Assembly instructions

• The cross bracket will snap into the main piece at a perpendicular angle.

Usage instructions

• Follow all cleaning instructions provided by the manufacturer of your food pouch.
• Insert the support from the bottom of the food pouch until the hook is fully protruding from the top.
• Slide the hook over the rim of the top and push it down in place.
• Place in the dishwasher, optionally sliding the support over a tine.
• To dry, just leave it standing.
• Make sure the areas where the hook and support made contact are clean, too.

Food safety notes

• Be aware of the limitations of 3D printing for food safety (see https://help.prusa3d.com/article/food-safe-fdm-printing_112313).
• Choose appropriate materials and printing/post-processing techniques.

Other notes

• The design is fully parameterized (I use OpenSCAD). If you'd like a simple modification, such as thickness, width, length, etc., please send me a message and I'll be happy to help.