DIGI remote battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's okay if it seems like it will have empty spaces as shown in a picture, I've printed it like this and it came out…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
It's okay if it seems like it will have empty spaces as shown in a picture, I've printed it like this and it came out full.
Feel free to file down the knob bit that holds the door until it can enter the slot with relative ease.
I used PETG at 0.1 layer height, pretty PETG profile, I didn't care much for looks, the marks on the surface are the inline on the back of the part, print slower and it should come out clean. NO supports needed as I've made custom ones, some clean up needed post print. Cheers.
If you find this useful or entertaining enough, tips are welcome. :)
Category: Replacement Parts