Simple Extension Shelf(s) for RecRoomMasters Xtension Sit Down Pedestal - or other similar builds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed more room, so this shelf adds more horizontal space to place things. 2 versions: 1) main cab 2) upper platform
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for the RecRoomMasters Xtension Sit Down Pedestal.
I ran out of space for controllers as I added more things to the setup.
This shelf works great, but I wouldn't put very heavy objects on it.
On mine, the upper section ones I use to hold two controllers and a charging station and on the other I have a standard Nintendo Switch with the dock and extra Joy Cons with a charging solution for them.
On the lower, man cabinet, I needed one to hold a PSVR headset.
They have bee great and sag-free for ~6 months now.
- The attachment part for the upper platform is about 23mm and maybe it could work on more setups. Even this one should use a little tape or hot glue to really make it 100% secure. This attachment part is open wider due to the acrylic top on the accessory area.
- The attachment part for the main cabinet top is about 20.5mm/.8" and maybe it could work on more setups. Even this one should use a little tape or hot glue to really make it 100% secure.
Print in black to match or have fun with it!
The STL for the upper platform is made for the LEFT side so there is a notch to avoid the rear screw, but you can mirror the STL in Cura or other slicer so it will work on the RIGHT side… or you can just have the notch in front. Your choice.
You may want to print this with a brim to prevent any print failures or warping/lifting depending on your setup.