Lid/Cap/Cover for backside of "IKEA Metod"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Closes the gap at the back of "IKEA Metod" cabinets
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
The lid is designed with two circular cut-outs and according caps (plugs). This allows you to lead cables through it or close the holes if you don't. The plugs snap easily into place and can be easily removed again.
Due to its size it's divided into three parts that can be glued together.
The easiest way to fix the finished lid at the “Metod” cabinet is to use a bit of glue.
A possible remix could be to hang/clamp it into the cabinet's cut-out.
I am using a “Metod” cabinet in combination with “Sindvik” doors as an enclosure for my Sovol SV06 - it works great!
Designed with FreeCAD, sliced with Cura.