Filamentboxes mounted on Ender 3 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
filamentbox1: Add a box to the stock spool holder filamentbox2: roller holder in the box, little place for desiccant
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
filamentbox1 adds a box to the stock setting. However, different bands of spools have different inner diameter. Therefore, I cannot promise it works on most of the spools in the market.
Extra parts:
608 bearing x 2
M3 x 40mm Screws
M4 x 8mm Screws
filamentbox2 adds roller holder in the box. It works on spools with 20 cm outer diameter which is most of the 1 kg spools' size in the market. There is a little place for desiccant, so the box can dry filament while printing.
Extra parts:
608 bearing x 4
M3 x 40mm Screws
M4 x 8mm Screws
I printed all the split parts instead of full bodys, so I melt some wasted PLA to stick them all together. I printed roller_base_mount.stl, one more roller and added two more bearings to turn filamentbox1 to filamentbox2. I filled the spool holder's hole and cut a hole for the roller base mount.