1 / 6
Nozzle/screw/nuts box (with prusa ,creality logo inside)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle/screw/nuts box (with prusa ,creality logo inside)
- Ocena
- 4,5 / 5
- Polubienia
- 55
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 1293
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (58)Powiązane
supports: no need
infill: 20% or more
Need two M4 screws
Check and my others designs ! thnx
tips:
If you found Difficult to remove support i recommend this settings:
0.25mm z distance
75% xy distance
3mm support spacing
4 interface layers
0,2mm interface layer spacing (Hope i help a little)
Lower speed better results ! Enjoy!