1 / 6
Phone Stand for IKEA LÅNESPELARE — zdjęcie 1
1 / 6

Phone Stand for IKEA LÅNESPELARE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Phone stand adapter that fits IKEA ring light

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I designed this phone stand to replace the stock one that comes with the IKEA LÅNESPELARE ring light. I wanted to have one that was just a gravity stand and didn't grab the phone. I also have a large case on my phone with a wallet on the back and wanted extra space for it. The stand is about 23mm deep. Of course you can set a narrower phone in there, I just don't see many being made to fit my thick phone.

This requires one M6 nut. You will want to look in your slicer and insert a pause or color change at the top of the hole for the nut and then put it into the print. This will then print over it and enclose the nut in the print. You can then simply screw it onto the stand

I printed with 0.2mm layers (0.28mm first layer) on a 0.4mm nozzle. Ender 3v2.

Tagi