Bottle straw elbow (Last Sipper)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little gizmo to get those last sips of water
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Greetings and salutations fellow makers
I always found it annoying when I can't get the last sip of water out of my bottle… so I present to you the “Last sipper”. Quick print and easy to “install”.
This model is compatible with 8mm bottle straws. Simply print, push onto straw (Cut staw a few mills shorter if it's too long), and enjoy the last few sips.
I used PLA (Wich is food safe) and was able to print without support in 25min!
Please share you makes and enjoy the "Last Sipper".
29/03/2023 UPDATE: I made a shorter version for those bottles where the original gets caught on the side